Belfast Locksmith Service

028 9649 6071

Electronic locks in a power cut: what actually happens and what to check

A rumour has been circulating on social media that the electricity grid would fail across the country on 19 November 2026. National Grid has said publicly that this is not true, so there is no national blackout to prepare for. The more useful news this week is a House of Lords committee report, published on 16 November 2026, which said the UK is seriously underprepared for emergencies and called for urgent action from the government. That is a good reason to check how your locks behave when the power is off, because the answer depends on the lock, not on the rumour.

Electronic locks are now common in homes and businesses. Keypads, fobs, smartphone apps and smart cylinders all promise convenience, and most of them work well. But a lock that depends on electricity, a network or a battery behaves differently from a traditional mechanical lock when something goes wrong. The aim of this guide is to explain what usually happens and to set out the checks that take a few minutes.

What happens to an electronic lock when the power goes

The honest answer is that it depends on how the lock is built. Many electronic locks run on batteries inside the door. A power cut at the property does not affect them at all, because they never drew power from the mains. Their main risk is a flat battery, which can arrive without much warning if nobody has checked it.

Other systems use mains power in part of the installation. A keypad or reader may be battery-powered, but the hub that connects it to an app, a network or a central controller may run from a plug socket. If that hub loses power, remote access can stop even though the lock itself still works. Door entry systems and electric strikes are another example, because the locking mechanism may need a live supply to release or to hold.

Some systems also rely on a network connection. An app that needs to reach a cloud service may be unable to send a command if the internet is down, even when the lock is perfectly healthy. In many cases the lock can still be opened with a code or a physical key, but you should confirm that rather than assume it.

Finally, the behaviour on failure is a design choice. Some locks stay locked when they lose power, some unlock and some hold their last position. Which one applies to your door matters a great deal, both for security and for getting out in an emergency. Check the manufacturer's documentation, or ask your installer, and write down the answer.

Check the power source and the battery

Start with the simplest question: what powers the lock? If it runs on batteries, find out which type, how long a set should last, and whether the lock gives a low-battery warning. Many systems send an alert to an app, but only if the app is set up to receive it. Check that the alerts go to a phone or email address that someone actually reads.

Replace batteries on a fixed schedule rather than waiting for a failure. Keep spare batteries of the correct type in a known place, and note the date you last changed them. A lock that runs out of power on a dark evening is a far bigger problem than a routine battery change in daylight.

If the lock depends on a hub, bridge or controller, check where that unit is plugged in. Some hubs have a battery backup, and others do not. Ask whether the hub keeps working without a connection to the internet, and whether the lock can still be used locally if the hub is off. This is the detail most people do not know until it matters.

Check your fall-back access

Every electronic lock should have a route in that does not depend on the electronics. That is usually a mechanical key, a fitted override or a physical cylinder that can be used when the battery is flat or the network is down. Find your key, test that it works in the lock and check that it is stored somewhere that the people who need it can reach.

Look at who holds codes, fobs and admin access to the system. A smart lock is only useful if at least two people can manage it, and if a single account, phone or email address is not the only way back in. Keep a written record of admin details in a secure place, and make sure any shared codes are changed when people leave.

Check how the lock behaves from the inside as well as the outside. In a business, the route out must stay simple and reliable at all times. Do not rely on an app or a keypad to open a door that people need to use in an emergency. If a door is used as an exit, get advice on how the lock should behave, and make sure that the people who use the building know how to open it.

Test the lock before you need it

A short test is more useful than any manual. Pick a quiet time, and check that the lock opens and closes with each method you have: the code, the fob, the app and the key. Check the latch, the strike plate and the door itself, since a door that has dropped or stuck will defeat even a good lock. If you have a hub, check its power light and note what the system shows when it is working normally.

Repeat the test after any change, such as a new battery, a software update or a new user. Keep a note of the result. If something does not work, get it checked before the next time you rely on it. A lock that opens once in testing is not the same as a lock that will open on the night it is needed.

If you are unsure how a particular lock will behave, or if you think the system needs changing, speak to a qualified locksmith or the installer. Do not try to rewire or modify a powered lock yourself, and do not leave a door in a state you are not confident about.

Key points

  • National Grid has said that a rumour of a national grid failure on 19 November 2026 is not true.
  • The House of Lords committee report of 16 November 2026 says the UK is seriously underprepared for emergencies, which is a reason to check your own locks.
  • Battery-powered locks often keep working in a power cut, but a flat battery is the most common problem.
  • Hubs, electric strikes and network-dependent apps can stop working when the power or the internet fails, so check each part of the system.
  • Know the default behaviour of your lock on failure, and keep a working mechanical or other fall-back way in and out.
  • Test every method of entry at least once, and repeat the test after any change to batteries, software or users.

For a guide to cold weather and stiff locks, see our article on cold snaps and stuck locks. For how smart locks interact with home insurance, see smart locks and UK home insurance.